Application
| These cables can function in case of fire Halgen Free, flame retardant, low smoke denstiy, Acidic (Corrosive) Gas Test, air ports, hospitals, metro, subway stations, shopping centers, high rise buildings, hotels, industrials plants and so on. signal and communication cables are used as an emergency circuits. |
Construction
| 1. | Inner Conductor | Electrolytic mono annealed copper (EN 60228, Class 1) |
| 3. | Lay-Up | Dual twisted cores are twisted together in 4-units, 4 units are twisted in layers and fixed with PES tape (Figure 1) |
| 4. | Flame Barrier | Screening is performed with AL-PES tape and mono tinned-copper or mono annealed copper drain wire |
| 4. | Screen | AL-PES Bant ile birlikte mono kalaylı bakır veya mono tavlı bakır toprak teli ile birlikte ekranlanır. |
| 6. | Outer Sheath |
General Features
 |
Flame Retardent (For Single Cable) |
IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2 |
 |
Flame Retardent (For a Bunch of Cable) | IEC 60332-3-24, EN 60332-3-24, VDE 0482-332-3-24 |
 |
Determination of (Test of determination of flaming droplets) | IEC 60332-1-3, EN 60332-1-3, VDE 0482-332-1-3 |
 |
Halogen Acid Gas Test | IEC 60754-1, EN 50267-2-1, VDE 0482-267-2-1 |
 |
Acidic (Corrosive) Gas Test |
IEC 60754-2, EN 50267-2-2, VDE 0482-267-2-2 |
 |
Smoke Density Test | IEC 61034-2, EN 61034-2, VDE 0482-1034-2 |
 |
Insulation Continuity Test (FE-) | IEC 60331-21, VDE 472 part 814 |
 |
Circuit Integrity With Shock (PH) | EN 50200, VDE 0482-200 |
Technical Properties
| Temperature Range | -30 °C …. +70 °C | |
| Operating Voltage | Max. 300 V | |
| Test Voltage | Core/core, 1500 V | |
| Min. Bending Radius | 10xD |
Documents
 JE-H(St)H…Bd FE-180 PH120 |
